| 瞬态超高压压阻式传感器技术研究 |
| Research on Technology of Transient Ultra-high Pressure Piezoresistive Sensor |
| |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
| 中文摘要: |
| 针对现有压力传感器不能满足高压、高温、高冲击等恶劣环境下高膛压测试的现状，提供了一种瞬态超高压压阻式传感器。该传感器利用惠斯通半桥式工作原理，选用具有良好压阻效应的硅锗锰铜丝作为敏感元件材料，通过改进制作工艺和装配方式，使该传感器能够承受瞬态高压、高温，实现对0～800 MPa动态压力测试。对比分析表明，在高、低、常温状态下，该传感器非线性误差均不大于0.5%，具有灵敏度高，体积小，安装灵活方便的特点，可广泛应用于高膛压火炮及高压密闭爆发器试验装置的压力测试与研究。 |
| 英文摘要: |
| Aimed at the problems of that the present pressure sensors can not adapt high pressure testing in high pressure、high temperature and high impact environment, a transient ultra-high pressure piezoresistive sensor was provided. The sensor works with the Wheatstone half bridge principle, and uses the well-piezoresistive alloy manufactured by SiGeMnCu as the sensing element material. By improving the production process and assembly method, the sensor can realize 0～800MPa dynamic pressure testing in transient high pressure and high temperature environment. The comparative analysis shows that the nonlinear error of the sensor is not greater than 0.5% at the high, low and normal temperature. The sensor has the advantages of high sensitivity, small volume and flexible installation. It can be widely used in the pressure testing and research of high pressure gun and airtight exploder device. |
|
| 中文关键词: 高膛压 传感器 敏感元件 非线性误差 标定 |
| 英文关键词:high pressure sensor sensitive element nonlinear error calibration |
| 基金项目: |
| DOI：10.11823/j.issn.1674-5795.2018.02.08 |
| 引用本文：张敏华，胡晓红，王育维，屈洁，张薇薇.瞬态超高压压阻式传感器技术研究[J].计测技术,2018,38(2):. |
| 关闭 |
