| 正弦力计量校准研究 |
| Investigation on Sinusoidal Force Calibration |
| |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
| 中文摘要: |
| 动态力是加速度的导出量，文章介绍正弦力计量标准装置研究与量值溯源现状，并认为根据动态力定义用激光干涉法测量加速度直接溯源到质量、加速度和时间是正弦力计量发展方向。由于正弦力计量中运动部件各处加速度不相等，因而研究质量块加速度分布非常重要，文章用圆板弹性动力学模型将质量块三维结构简化为一维结构研究加速度径向分布，再用杆件结构动力学模型进一步简化为质点研究加速度轴向分布，进而减少正弦力测量结果不确定度。 |
| 英文摘要: |
| A dynamic force is the product of mass and acceleration. This paper describes the status of sinusoidal force measuring standard device and the development of sinusoidal force traceability. It is the development direction of the sinusoidal force measurement to measure the acceleration by laser interferometer and trace directly to the mass, length and time according to the definition of dynamic force. In order to reduce the uncertainty of the sinusoidal force measurement, it is very important to accurately measure the acceleration distribution of the loading mass, the coupling between loading mass and force sensor, and the equivalent mass of force sensor end. Based on the elastic dynamics theory, the three-dimensional structure of the mass is simplified into a one-dimensional structure by using the circular plate elastic dynamic model to study the radial distribution of the acceleration. The dynamic model of the bar structure is further simplified into a point to study the axial distribution of the acceleration, and the accuracy of the measurement results of the sinusoidal force is improved. |
|
| 中文关键词: 正弦力 量值溯源 质量块 加速度 |
| 英文关键词:sinusoidal force traceability mass body acceleration |
| 基金项目: |
| DOI：10.11823/j.issn.1674-5795.2020.01.14 |
| 引用本文：曾利民.正弦力计量校准研究[J].计测技术,2020,(1):. |
| 关闭 |
